You have a baby monitor.  How about a powerful nanny monitor? Capture clear video with this unassuming cuddly teddy bear. The QUAD LCD receiver allows you to connect up to 4 cameras at once. Utilize the included 7″ LCD screen for easy camera set up and for the convenience of monitoring from a different room in your home. The portability of a battery powered nanny cam that can go anywhere is on your side. This cute bear is powered by long life battery. Its battery life is extended with a low energy sensor that activates only when body heat is detected.

Watch over your childcare from anywhere! Connect the receiver to an operational PC to monitor your hidden camera system remotely from your iPad or smart phone with the free EZ-See app.

With Xtreme Life Wireless you can:

  • Build your own hidden camera system: connect up to 4 of any combination of Xtreme Life, Zone Shield or Night Vision Wireless hidden cameras
  • Install included software and watch video remotely via an easy access weblink
  • Record locally to a removable SD card
  • Connect via USB to your PC then watch and record
  • Connect via RCA to your TV, DVR or VCR then watch and record
  • Unlike other covert models you can:
  • Enjoy hassle free set-up with no IP configuration to deal with
  • Connect 3 more of our SleuthGear Addon hidden cameras

Each individual receiver comes with a unique and dedicated website address for easy to use web based remote video access. No more IP hassles, router configurations, or port forwarding. Locate the website address on the label found on the back of your receiver, install ASP4 software on your PC, connect your receiver to your PC using the provided USB cable, and the Xtreme Life unit is ready for use.

  • Easy install: just charge it, place it, and it will do the rest
  • 2 second start up for motion activated recording using PIR (heat motion)
  • Battery operated for up to 30 days of operation in standby mode
  • No visible wires
  • Install up to 4 hidden cameras and get simultaneous Quad Video Display and Recording
  • Remote Video Access – Users can remotely access their hidden camera systems from any PC with internet access
  • SmartPhone/Tablet Application – Download the free EZ-SEE application from Apple’s App Store and get instant remote video access on your iPhone & iPad devices.
  • 3 possible recording modes: Motion, Scheduled, or Continuous Recording
  • 2 possible recording methods: Internal SD Card Recording via the removable SD card in the receiver(up to 32 GB SD capable) or PC based recording with installation of APS4 software
  • Receiver (with LCD screen option on QUAD LCD models)
  • Remote Control
  • Power Supply
  • USB Cable
  • RCA Cable
  • A/V RCA
  • Firmware Upgradable using SD card
  • Frame Rate: 6/8,13/15,25/30
  • Video Resolution 720 X 240
  • IR remote control
  • Micro SD card up to 32GB
  • 3 Record Modes – Motion, Continuous and Scheduled
  • Time and Date Stamp
  • PIR function
  • Playback Video from Device or Bundled Software EZ See application
  • Camera:
    • 500TVL
    • .01 LUX
    • Color
    • 720 x 480 pixels
    • Auto White Balance
    • 62 Degree Viewing Angle
    • NTSC or PAL
  • Battery:
    • Rechargeable 2.7v Li Polymer Battery
    • Charging Time 4-5 hours
    • Blue indicator when fully charged
    • Red indicator light when charging
  • Receiver:
    • Recording Resolution 620 x 480
    • 4 Channel Hidden Camera Connectivity
    • Recording Mode – Motion, Continuous, Scheduled Time and Date Stamp
    • Up to 32GB SD Card Supported
    • USB Interface for PC Recording and Remote Video Access Setup
    • Transmission distance is approximately 450 feet line of sight
    • Recording File Format TL4 playback with bundled ASP4 Software
  • Transmitter
    • Transmission distance is approximately 450 feet from hidden camera
    • Power 12V
    • Channels Hopping: 24 channels
    • Frequency: 2408.625 ~ 2470.5 MHz
    • Resolution / Frame Rate: 640×480@30fps
  • System Requirements:
    • A dedicated PC for recording is required for Remote Video Access a PC will need to be on at all times running the supplied ASP4 Software with the Wireless Receiver connected to the USB port
    • Browsers for Remote View: Internet Explorer 8 or higher, Chrome
    • Memory: 1GB
    • Display card: Independent display card and support DirectX 9.0 or higher
    • CPU: 2.0GHz or higher (only support x86 and x64)
    • Recommend internet speed: 1 MB per second upload speed
    • Microsoft Windows XP or Windows 7 (.NET Framework 3.5 higher)
    • Power Consumption: 12V 270mA
    • To use the remote viewing on iPhone/iPad, iPhone 3 or higher iPad iOS 4.3 or higher